|
Revolutionary welding helmet with grinding mode
Can be used for MIG, TIG, ARC Welding
and Plasma Cutting
Grinding mode switch. Switch is
separate from main shade adjustment dial, allowing switching between
welding and grinding mode without interfering with the shade
selection
Full
adjustment of the headband in all directions including forward and
backward movement (in 3 steps) of the entire helmet i.e. alters the
distance the mask is from the user's face
Metallic paint finish ensuring maximum heat reflection for user
comfort
Controls
Delay time
(internal), length of time taken for the lens to lighten after welding -
Short, ideal for tack welding - Medium,
ideal for production welding - Long, ideal for high
amperage where there is an afterglow
Sensitivity
variable adjustment to suit ambient light levels - At
Lower settings, helmet will not switch due to sunlight or
welders working in close proximity - At Higher settings,
response is better to small arcs as in TIG welding
Grinding
Mode
sets the filter cartridge in permanent light state, no
darkening
• Slim and Lightweight
• Automatic Light Adjustment
from light to dark in 1/25,000th of a second
• Shade Control from DIN9-13
•
Variable Sensitivity
• Viewing Area 98mm x 44mm / 3.86” x 1.76”
• Full Face
Coverage
• Automatic Power On/Off
• Battery Life Expectancy 6 years
• UV/IR
Protection up to shade DIN 16
• Conforms to CE and BS EN 379:BS EN 175: ANSI
Z87.1
• 18 Months Warranty
Arc welding generates visible light, infrared and ultra violet
radiation, which can damage eyes and skin. The Parweld XR915 Light
Reactive Welding Helmet offer’s the latest innovative protection for the
welder. Moulded Construction - The XR915 is both slim
and lightweight in construction. Manufactured from a high impact polyamide
nylon material which ensures the helmet provides high levels of comfort
and durability. The metallic paint finish ensures maximum heat
reflection.
Full Face Coverage - A curved design with a
clear spatter shield over the optics provides maximum clarity. The helmet
is fully adjustable to suit all head and body types. Features full neck
coverage, locking headgear and no on/off switch.
Fast
Switching - The auto on, auto darkening, wide view lens switches
from light to dark in 1/25000th of a second and offers continuous eye
protection against UV and IR radiation, even when the lens is in the light
state mode. The grinding switch is conveniently located on the outside of
the helmet. The switch locks the filter in the light state (shade 4) to
enable the helmet to be used as a grinding visor.
Solar Powered - The helmet is powered by a self-charging solar cell 3-volt
lithium battery; there is no need for external batteries or cables.
Battery life expectancy is 6 years.
Filters - The
welding filter has 2 photo sensors that react independently as the welding
arc is struck enabling the almost instantaneous darkening of the
filter. The switching sensitivity knob is located on the outside of the
helmet and allows the use of differing light levels. The light state of
the helmet is shade 4 which is ideal for welding
preparation.
Conforms to European Standards - The XR915
Light Reactive helmet complies with BS EN 379:1994 and BS EN 175:1997:ANSI
Z87.1:1989
Technical Specifications
Viewing
Area 98mm x 44mm /3.86” x 1.76”
Cartridge Size 122mm x 100mm x 9mm / 4
” x 3 ” x 3 ”
UV/IR Protection Permanent Shade DIN16
Light State DIN
Shade 4
Dark State DIN Shade 9 to 13 Variable
Power Supply Solar
cells with built in rechargeable battery (estimated 6 year
life)
Switching Time Light to dark 0.00004 seconds
Light to Dark
0.25 - 0.35 seconds - fast position 0.60 - 0.80 seconds - slow
position
Operating Temp -5ºC to +70ºC (23ºF to 131ºF)
Storage Temp
-20ºC to +70ºC (-4ºF to -158ºF)
Helmet Material High Impact Polyamide
Nylon
Total Weight 560g
Minimum
Amperage Stable at 40 Amps
 In Stock
|
Tool Trolleys
Personal Protection
